1Tb 7g iPod Classic – Restore & Sync Video

1Tb 7g iPod Classic – Restore & Sync Video

Posted a new video – demonstrating the complete restore and sync of a 1Tb 7.5g iPod Classic.

I have done this many many times now with zero problems, so I thought this time I would make a video.

Syncing is done using iTunes 11, importantly I used the Apple Dual Firewire/USB Docking Lead, and the Apple 12V Firewire charger.

The firewire can supply enough power to the iPod while syncing that you do not have to worry about Power Loss Corruption issues which can occur while syncing mSata drive based iPods. The iPod USB Charge circuit cannot supply enough power to the mSata during syncing to stop the battery drain issues.


  • iPod Classic (7.5g 160Gb Model PC297LL)
  • iFlash-Sata
  • Samsung 840EVO 1Tb mSata
  • Apple 12V Firewire Charger
  • Apple Dual Firewire/USB Docking Lead


Tracks Sync’d:  49995 Tracks

Data Sync’d:   907Gb Transfered

Time Taken: Restore to Sync to Eject  approx. 11 hours


Click on video settings to select the 1080p HD version.

178 thoughts on “1Tb 7g iPod Classic – Restore & Sync Video

  1. Mark

    How does one tell it a logic unit is 6th or 7th Generation. Both have the same part number of 820-2437-A. I have a working 1TB unit with that number. I also have a unit with the same number and I believe a 6th G yields a red X if I connect the iFlash to it. I see that sellers list the same number for both 6th and 7th G units, but I know they are different.

  2. Support Post author

    @Ryan – our reports and experience is totally opposite to yours, so far the 850EVO 1Tb has been flawless and performs much much better than the 840EVO. I have not experienced a single Power Loss Mode with our test unit, and that is abused quite a bit.

    Your problems could be just the iPod itself, some iPods either due to faults or component variations cannot supply the required power. Maybe the ZIF connector on the iPod is too worn and the power connection is not so good. It could be several things combining to cause the issue you have.

  3. Ryan

    @tarkan Hello I am having the same red x problem using a 1tb with a different Ipod now. I am using the msata iflash with a samsung 850 evo 1tb drive. Smart test is good, and the drive test was good. After clipping in the battery sometimes I get the “restore Ipod” screen, but 98% of the time I get the red x. Last time I had the problem I was using the third party 3000mah battery which you said have problems because they aren’t reliable. With that in mind I tried with the stock battery and same problem. I changed the drive cable and no change there. I tried one of the prototype drive cables and no change there. I tried a different msata drive no change. I tried a 256gb samsung pm851 msata and it restored fine. Not sure why the 1tb 850 evo drives are so temperamental.

  4. Support Post author

    @Ryan – Yes, Internal Resistance – all them high capacity batteries have very high IR (read poor quality battery!), and the voltage of them sag quite a bit under load. The IR tends to get worse with lower charge, so make sure they are fully charged up, and see if that allows it to boot up the 1Tb.

  5. Ryan

    @tarkan I switched out the ribbon and still got the red x. The battery I am trying to put in is a high capacity 3000mAh battery. I tried 5 different high capacity batteries and got the red x with all of them. Then I put back in the original stock battery and I got the restore screen. Then I tried the high capacity batteries in a different 7th gen 160gb and they all worked. Any ideas? Thanks again.

  6. Support Post author

    @Ryan – Battery and HDD Ribbon would be good places to start. While harder to enter than the 840EVO, the 850EVO do have a Power Loss Mode – so running a surface scan via a mSata-Sata enclosure, and proper power down sequence will clear it. They actually have the Power Loss Mode logged in the SMART data table ( 235 – POR Recovery Count ), you can see if that has been occurring.

  7. Ryan

    @tarkan I am upgrading a 7th gen 160gb with an iflash sata and a samsung 850 evo 1tb msata drive. I keep getting the red x. I have tried two different iflash sata. They are the 2017 versions that work with the 850 evo msata drives. I have also tested the drive and everything is fine there. Any ideas?

  8. Lebowski

    Hi Guys,

    I just upgraded my iPod with a Samsung SSD 840 512 GB. The sync went without a hitch but I tried to listen to the music via headphones and the quality was miserable. Did I damage some components during the opening procedure?

    I look forward to hearing from you!

  9. John

    Just went through the upgrade with a 256GB mSATA (EVO850) and I have a few observations: Trying to format the SSD with the iFlash installed in the iPod doesn’t seem to work very well. I used an external enclosure and it formatted perfectly. Then I installed it and factory reset the iPod. Also, the use of the combo Firewire charger and USB was a great idea. I was able to leave the battery disconnected and used the Firewire during the sync. Never had a problem with power loss or overheating. The only other complication was the “enable disk use” on the iPod. I had may problems with this checked, so I left everything unchecked and it synced without any issues. The 18,000 tracks I have synced in about an hour and a half as opposed to the 8-10 hours for the old HDD. The only down side so far is the pause does not work (although play does) and I’m not sure (yet) the sound quality is the same as the original iPod hardware. Overall I’m happy to have my iPod Classic back, hopefully for a long, long, time!

  10. Support Post author

    @rubeN – The main difference is a soft-start function to handle the surge/start up power required by the 850EVO chipset which the iPod struggles with.

  11. rubeN

    @Tarkan I’m curious as to what changed on the new iFlash-SATA adapter that now makes it work on with the 850 EVO 1TB. The 850’s (3D NAND) are much better drives than the 840’s.

  12. Support Post author

    @Ryan – Yes we have finished our testing with the 1Tb 850EVO with the latest version of the iFlash-Sata v7, with no problems. Later on this year I will be re-running the power consumption test with the 850EVO 1TB replacing the 840EVO.

    It definately runs much cooler while syncing compared to the 840EVO, so I expect that to also feed in to longer runtimes.

  13. Ryan

    @tarkan I have seen new note added to the Msata section for drives that work with the iflash sata. Under the Samsung 850 evo 250gb, 500gb, 1tb it now says “These only work with iFlash-Sata v7 (sold since Oct 2016)”. It used to say that the 850 evo 1tb wouldn’t work. I want to double check and clarify that the new version of iflash msata drives will now work with the 1tb 850 evo? Please let me know as I wanted to be sure it now works before buying one. Thanks.

  14. Ryan

    Mark, you may have hit the track limit. Are you using iTunes or a 3rd party program like Rockbox? If using iTunes I would assume you hit the track limit. I know this sucks but delete 5k-10k tracks and see if that makes a difference.

  15. Mark

    I built my unit using parts. However the screen just goes white (or grey). The logic boatd is a 7G I once had working with a 1TB. The screen, I was told by the vendor, is 7G. What went wrong?

  16. Mark

    Bare with me a bit. What is the minimum setup to get a beep in Win10. If I connect a logic board without a screen to WIN10 that used to work fine, will it be recognized as a non-functioning ipod?

  17. Matt Glad

    I’ve been messing around with a 500gb and yes there seems to be a limit driven by songs/ library file size. I’m sitting on c65k tunes, c 370gb storage used and a library file of 108MB.
    At that level, it’s on the edge of breaking down, e.g. it crashes when you shuffle from the entire library, but not from a smaller sub-playlist/ genre/ artist etc.
    Going above that, e.g. to 470 gb storage used, it pretty much crashes and needs a hard reboot the whole time, and may need total rebuild as well.
    Hope this helps

  18. Support Post author

    @ Robert – It is not set in stone, it all depends on the library itself and the amount of meta-data within the iTunes database, the working range we have seen is around 40,000 to 65,000 tracks. 1Tb makes more sense for people who have very high bitrate or lossless files – ~4 minute lossless ALAC can easily exceed 30MB filesize.

  19. Robert

    Am I correct that for a 7G Classic, the song limit of ~ 50,000 is set in stone? So realistically it’s not necessary to install more than a 500GB drive as much of a 1TB drive would never be used? (for 49995 tracks, 907 GB above, that comes to 18.1 MB per track.)

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.

Closed - We will be closed till the 31st May. Order shipments willl resume from the 1st June. Thank you for your support. Dismiss